[dvnr] Amperage question, and gathering
Joe Matkowski
jmat1957 at gmail.com
Tue Apr 2 16:19:28 EDT 2019
Hi all.
Got my answer.
I forgot there is the in line fuse on the negative side already. 35 amp.
So just need to duplicate this on positive side ( I can’t get to the
existing fuse, too far buried when battery is installed). I want to be able
to just pull the cover, and pull a fuse to break the circuit.
I’ll put a 35 or higher on this side, to act as my jumper.
Still need date of gathering though. Trying to make it this year.
Joe
On Tue, Apr 2, 2019 at 3:44 PM Joe Matkowski <jmat1957 at gmail.com> wrote:
> Hi all,
> Does anyone know what’s the maximum amps drawn on a 1975 MK3 (my Hi Rider)?
> I’d like to put a fuse in line so I can break the circuit when charging it
> with the battery on the bike.
> If you all remember, I have a strange problem when charging, where the
> Iights turn on (ignition and lights are off). You can’t turn them off
> until you disconnect the battery. Won’t even turn off just pulling the
> charger off. No one has been able to figure this one out. Everything is
> fine any other time. So throwing an in line fuse in, I could just pull the
> fuse. Just want to make sure I but a high enough fuse in (it’s not acting
> like a fuse, more like a jumper in this case).
> Also - what date is the gathering ?
> Thanks, Joe
>
>
More information about the DVNR
mailing list