[PAAirheads] Tank Pad Glue

[Larry A. Mansfield]

Thanks to all who responded to my request for help with gluing the tank 
pads.  I ended up getting the Loctite 454 adhesive and the 3M adhesive, 
aka "snot glue".  I tested both on scrap material and both work really 
well.

My preference at this time is for the Loctite 454.  It's a bit more 
expensive but it's clear and the set up time is very quick. If you use 
the Loctite 454 you had better have the positioning right because it 
firms up within 15-30 seconds and it's nearly dry by the 1 minute mark.

-- 
larry m