[NJairheads] possible CT tech day

[William Dudley]

Contact the Connecticut Airmarshal and ask him. His contact info is in the
back of every AirMail.  Please report back what you find.

Bill Dudley
NJ AM

sent from my Linux phone

On Sun, May 6, 2018, 10:54 AM Steve Giannotti via NJairheads <
njairheads at casano.com> wrote:

> I had a nice time at The Tech Guy in Mount Kisco yesterday there was talk
> of another tech day in Connecticut but I can't seem to find it on the
> website any information would be appreciated thank you Steve giannotti
>
> On Fri, Apr 27, 2018, 3:54 PM Jean Lachaud via NJairheads <
> njairheads at casano.com> wrote:
>
> > 2018 Tappan Zee Tech Day:
> > Saturday May 5
> > Mount Kisco, NY 10549
> >
> > The 2018 downstate NY tech day will be held in Mount Kisco, NY (about 40
> > miles north of Times Square on the Saw Mill River Parkway) at the home of
> > Steve and Rady Bauer.
> > Steve has some neat vintage BMW's and collectibles that are quite nice
> and
> > rare.
> >
> > The tech day will take place in a 2-bay garage, with one lift, and plenty
> > of
> > space (gravel driveway) outside.
> >
> > If you have a more complex project, contact Jean Lachaud (
> jean at beheme.info
> > )
> > ahead of time, so that any special tools and other requirements can be
> > arranged, if possible.
> > A Grok Harmonizer carb tool for synching and adjusting carbs will be
> > available, as well as electrical supplies and tools.
> >
> > As always, remember to bring your own fluids and parts, and special tools
> > if
> > you need them.
> >
> > If a parts run is necessary, Mount Kisco is about 35 minutes and 2 lights
> > from Max BMW store in Brookfield, CT, which closes at 3 pm on Saturdays.
> >
> > ** PLEASE RSVP **: Let us know you're coming so we can plan for enough
> > food!
> >
> >
> > We'll start around 9am with bagels and custom roasted coffee by coffee
> > importer Steve Bauer, and later a grill lunch (dogs and burgers, sodas,
> > etc.)
> > A $10 contribution for food & beverages is requested.
> >
> > Please e-mail Steve at cotyledoncoffee at gmail.com  for more info and
> > directions:
> >
> > Steve Bauer:
> > Address:                14 Woodland Rd, Mount Kisco, NY 10549
> > Home Tel.               914-864-2267
> > Steve Cell:             914-960-9669
> >
> > Address Notes:  We are not easy to find!  There is more than one
> "Woodland"
> > near Mount Kisco which can confuse navigation systems.  We are NOT
> Woodland
> > Street, Avenue or Lane, etc.  We are Woodland Road, which is off Crow
> Hill
> > Road.
> >
> > NOTE: Remember that trailers and commercial vehicles are not allowed on
> > Parkways.
> >
> > *       Best route North/South is the Saw Mill River Parkway to the Mount
> > Kisco exit (No. 34), go West (left turn) on Route 133 to Crow Hill, go
> > North
> > (right turn) on Crow Hill at the white church to the stop sign, then left
> > (still Crow Hill Road) to the first right on Woodland Road. It is a
> gravel
> > road so drive slowly. Follow the signs at the pond to 14.
> > Total from SMRP exit is about a mile.
> >
> > *       Also possible is via Route 100 to Crow Hill (heading East) to
> > Woodland Road.
> >
> > Crow Hill Road is easily accessed from NY Routes 100 and 133. Both routes
> > can be accessed at Exit 8 (Millwood) of the Taconic State Parkway.
> >
> > Mount Kisco is easily accessed on NY Routes 133, 117 and 172, as well as
> > exit 34 of the Saw Mill River Parkway, and exit 4 of I-684.
> >
> > Hope to see you all on May 5!
> >
> >
> >
> > ---
> > This email has been checked for viruses by Avast antivirus software.
> > https://www.avast.com/antivirus
> > _______________________________________________
> > NJairheads mailing list
> > NJairheads at mail.casano.com
> > https://mailman.dudley.nu/mailman/listinfo/njairheads
> >
> _______________________________________________
> NJairheads mailing list
> NJairheads at mail.casano.com
> https://mailman.dudley.nu/mailman/listinfo/njairheads
>