[NJairheads] Reminder: Tappan Zee Tech Day next May 5

[Steve Giannotti]

I had a nice time at The Tech Guy in Mount Kisco yesterday there was talk
of another tech day in Connecticut but I can't seem to find it on the
website any information would be appreciated thank you Steve giannotti

On Fri, Apr 27, 2018, 3:54 PM Jean Lachaud via NJairheads <
njairheads at casano.com> wrote:

> 2018 Tappan Zee Tech Day:
> Saturday May 5
> Mount Kisco, NY 10549
>
> The 2018 downstate NY tech day will be held in Mount Kisco, NY (about 40
> miles north of Times Square on the Saw Mill River Parkway) at the home of
> Steve and Rady Bauer.
> Steve has some neat vintage BMW's and collectibles that are quite nice and
> rare.
>
> The tech day will take place in a 2-bay garage, with one lift, and plenty
> of
> space (gravel driveway) outside.
>
> If you have a more complex project, contact Jean Lachaud (jean at beheme.info
> )
> ahead of time, so that any special tools and other requirements can be
> arranged, if possible.
> A Grok Harmonizer carb tool for synching and adjusting carbs will be
> available, as well as electrical supplies and tools.
>
> As always, remember to bring your own fluids and parts, and special tools
> if
> you need them.
>
> If a parts run is necessary, Mount Kisco is about 35 minutes and 2 lights
> from Max BMW store in Brookfield, CT, which closes at 3 pm on Saturdays.
>
> ** PLEASE RSVP **: Let us know you're coming so we can plan for enough
> food!
>
>
> We'll start around 9am with bagels and custom roasted coffee by coffee
> importer Steve Bauer, and later a grill lunch (dogs and burgers, sodas,
> etc.)
> A $10 contribution for food & beverages is requested.
>
> Please e-mail Steve at cotyledoncoffee at gmail.com  for more info and
> directions:
>
> Steve Bauer:
> Address:                14 Woodland Rd, Mount Kisco, NY 10549
> Home Tel.               914-864-2267
> Steve Cell:             914-960-9669
>
> Address Notes:  We are not easy to find!  There is more than one "Woodland"
> near Mount Kisco which can confuse navigation systems.  We are NOT Woodland
> Street, Avenue or Lane, etc.  We are Woodland Road, which is off Crow Hill
> Road.
>
> NOTE: Remember that trailers and commercial vehicles are not allowed on
> Parkways.
>
> *       Best route North/South is the Saw Mill River Parkway to the Mount
> Kisco exit (No. 34), go West (left turn) on Route 133 to Crow Hill, go
> North
> (right turn) on Crow Hill at the white church to the stop sign, then left
> (still Crow Hill Road) to the first right on Woodland Road. It is a gravel
> road so drive slowly. Follow the signs at the pond to 14.
> Total from SMRP exit is about a mile.
>
> *       Also possible is via Route 100 to Crow Hill (heading East) to
> Woodland Road.
>
> Crow Hill Road is easily accessed from NY Routes 100 and 133. Both routes
> can be accessed at Exit 8 (Millwood) of the Taconic State Parkway.
>
> Mount Kisco is easily accessed on NY Routes 133, 117 and 172, as well as
> exit 34 of the Saw Mill River Parkway, and exit 4 of I-684.
>
> Hope to see you all on May 5!
>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
> _______________________________________________
> NJairheads mailing list
> NJairheads at mail.casano.com
> https://mailman.dudley.nu/mailman/listinfo/njairheads
>