rotors from Euro MotoElectrics

[Chris]

this may be a viable option for you....

https://www.ebay.com/itm/254412223182?hash=item3b3c2672ce:g:sxAAAOSw4CFY0ok7




On Tue, Jul 13, 2021 at 4:01 PM Bill <bachman.bill at gmail.com> wrote:

> I found reasonably priced rotors from EME ($243 each) but was confused by
> the 3.5mm MINIMUM thickness noted so I contacted them:
>
>     Your listing says "NOTE: Minimum Thickness is 3.5mm". Is that correct?
> BMW spec is to replace anything less than 4mm.
>
> This was their somewhat bizarre response:
>
>     Hi these rotors are made by Brembo who is the OEM supplier to BMW for
> most brake parts.
>     The listing says the "minimum thickness is 3.5mm", so that means that
> is the MINIMUM.
>
>     Hope that helps?
>
> Well, no it didn't.  Anyone figure out what they mean?  How can minimum be
> less than the rejection spec?
>
> thanks, Bill Bachman
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.dudley.nu/pipermail/mdairheads/attachments/20210713/e633b0a6/attachment.htm>