From l_a_mansfield at me.com Thu Oct 3 12:45:42 2019 From: l_a_mansfield at me.com (Larry A. Mansfield) Date: Thu, 3 Oct 2019 12:45:42 -0400 Subject: [PAAirheads] Project Bike For Sale Message-ID: Bike is an 84 R100CS Last Edition with verified numbers.? 95% done.? Needs mostly cosmetic work assembled.? Fairing, seat cowling, front fender.? Mechanicals upgraded including engine rebuild, transmission tear down, rear drive, wheel bearings, front forks rebuilt, carbs rebuilt.? Many new parts since bike had been sitting so long.? Fresh paint on everything except side covers with original factory script on sides.? Original tank had rusted through and not salvageable.? Fender and fairing had many scratches.? Beyond nice patina.? Two stage pearl white with clear coating was used to match original color. Bike is a rolling running chassis.? Carbs need adjustment and balancing yet.? Intermittent issue with charging light flickering at higher RPM's.? May be bad brushes or wiring resistance issue. New stator, rotor, regulator, and Diode board.? Also new electronic ignition. My price is $3800.? Firm.? I've got considerably more than that invested in the bike. Why sell at this point?? I'm running out of space, too many other projects, and knowing this would be a nice project for someone to finish up and enjoy.? My R90S is consuming all my time and extra space. Pics available for interested person along with loads of details on what has been done. Oh, original miles in the 38k range.? It was stored away for a lot of years. -- larry m Delta, PA 17314 410.218.1725 From thomasfurey at gmail.com Wed Oct 9 12:04:43 2019 From: thomasfurey at gmail.com (Thomas Furey) Date: Wed, 9 Oct 2019 12:04:43 -0400 Subject: [PAAirheads] R100 Body Parts, Rear Rim, Brown Side Stand, Carbs, & Tank in Pittsburgh Message-ID: <6AB71655-9461-4941-9369-9FA78038A815@gmail.com> I am cleaning house and have a few parts I am purging from my inventory. A set of BING Carbs rebuilt by Craig Immel 3 years ago I freshly powder coated rear rim & Michelin Pilot Activ tire Freshly painted Front / rear fenders / side covers in Hemi Orange (just like the General Lee) Front fender, side covers, rear cowell, in Brown and Tan A Brown R100 tank K100 Front Rim Set of Koni Shocks Brown Side stand Anybody interested please let me know. I am selling the stuff on eBay as well. The freshly painted front and rear fenders were never on my R100 just the side covers. I have enough paint left over if you want to paint a tank or seat cowell for your next build. I had my bike wiped out at an intersection 8 weeks ago, so I am purging my inventory. Not to worry?. I still have my R90. Thanks Tom From l_a_mansfield at me.com Thu Oct 10 12:57:18 2019 From: l_a_mansfield at me.com (Larry A. Mansfield) Date: Thu, 10 Oct 2019 12:57:18 -0400 Subject: [PAAirheads] BMW Factory Film Message-ID: <3eb543ff-4572-966a-dfa6-93eb12964484@me.com> I came across this today.? Some may have seen this before but thought it well worth sharing.? It's a video from 1975 at the BMW Motorrad factory.? What a great video of the bike assembly process. https://www.youtube.com/watch?v=tlKs3Q0JdMQ&feature=youtu.be -- larry m From eod1052 at gmail.com Fri Oct 11 08:46:47 2019 From: eod1052 at gmail.com (Eric Odinski) Date: Fri, 11 Oct 2019 08:46:47 -0400 Subject: [PAAirheads] BMW Factory Film In-Reply-To: <3eb543ff-4572-966a-dfa6-93eb12964484@me.com> References: <3eb543ff-4572-966a-dfa6-93eb12964484@me.com> Message-ID: Did anyone notice the quality control issue? Interesting video. Sent from my iPhone > On Oct 10, 2019, at 12:58 PM, Larry A. Mansfield via PAAirheads wrote: > > ?I came across this today. Some may have seen this before but thought it well worth sharing. It's a video from 1975 at the BMW Motorrad factory. What a great video of the bike assembly process. > > https://www.youtube.com/watch?v=tlKs3Q0JdMQ&feature=youtu.be > > -- > larry m > > _______________________________________________ > PAAirheads mailing list > PAAirheads at casano.com > https://mailman.dudley.nu/mailman/listinfo/paairheads > UNSUBSCRIBE: mail to PAAirheads-unsubscribe at casano.com From treborors at hotmail.com Fri Oct 11 11:40:37 2019 From: treborors at hotmail.com (Bob Price) Date: Fri, 11 Oct 2019 15:40:37 +0000 Subject: [PAAirheads] BMW Factory Film In-Reply-To: References: <3eb543ff-4572-966a-dfa6-93eb12964484@me.com>, Message-ID: What issue did you see? Sent from my iPhone > On Oct 11, 2019, at 1:47 PM, Eric Odinski via PAAirheads wrote: > > Did anyone notice the quality control issue? Interesting video. > > Sent from my iPhone > >> On Oct 10, 2019, at 12:58 PM, Larry A. Mansfield via PAAirheads wrote: >> >> ?I came across this today. Some may have seen this before but thought it well worth sharing. It's a video from 1975 at the BMW Motorrad factory. What a great video of the bike assembly process. >> >> https://www.youtube.com/watch?v=tlKs3Q0JdMQ&feature=youtu.be >> >> -- >> larry m >> >> _______________________________________________ >> PAAirheads mailing list >> PAAirheads at casano.com >> https://mailman.dudley.nu/mailman/listinfo/paairheads >> UNSUBSCRIBE: mail to PAAirheads-unsubscribe at casano.com > > _______________________________________________ > PAAirheads mailing list > PAAirheads at casano.com > https://mailman.dudley.nu/mailman/listinfo/paairheads > UNSUBSCRIBE: mail to PAAirheads-unsubscribe at casano.com From eod1052 at gmail.com Fri Oct 11 13:08:52 2019 From: eod1052 at gmail.com (Eric Odinski) Date: Fri, 11 Oct 2019 13:08:52 -0400 Subject: [PAAirheads] BMW Factory Film In-Reply-To: References: Message-ID: Check out the paint bike being roller tested at the end Sent from my iPhone > On Oct 11, 2019, at 11:40 AM, Bob Price wrote: > > ?What issue did you see? > > Sent from my iPhone > >> On Oct 11, 2019, at 1:47 PM, Eric Odinski via PAAirheads wrote: >> >> Did anyone notice the quality control issue? Interesting video. >> >> Sent from my iPhone >> >>>> On Oct 10, 2019, at 12:58 PM, Larry A. Mansfield via PAAirheads wrote: >>> >>> ?I came across this today. Some may have seen this before but thought it well worth sharing. It's a video from 1975 at the BMW Motorrad factory. What a great video of the bike assembly process. >>> >>> https://www.youtube.com/watch?v=tlKs3Q0JdMQ&feature=youtu.be >>> >>> -- >>> larry m >>> >>> _______________________________________________ >>> PAAirheads mailing list >>> PAAirheads at casano.com >>> https://mailman.dudley.nu/mailman/listinfo/paairheads >>> UNSUBSCRIBE: mail to PAAirheads-unsubscribe at casano.com >> >> _______________________________________________ >> PAAirheads mailing list >> PAAirheads at casano.com >> https://mailman.dudley.nu/mailman/listinfo/paairheads >> UNSUBSCRIBE: mail to PAAirheads-unsubscribe at casano.com From treborors at hotmail.com Fri Oct 11 14:46:21 2019 From: treborors at hotmail.com (Bob Price) Date: Fri, 11 Oct 2019 18:46:21 +0000 Subject: [PAAirheads] BMW Factory Film In-Reply-To: References: , Message-ID: Loved seeing those bikes being hand assembled. A R90S was at the beginning of the video. 1975 was the second year the R90S was made. Seeing the kids lady hand pin striping the tank was neat. Sent from my iPhone > On Oct 11, 2019, at 6:08 PM, Eric Odinski wrote: > > Check out the paint bike being roller tested at the end > > Sent from my iPhone > >> On Oct 11, 2019, at 11:40 AM, Bob Price wrote: >> >> ?What issue did you see? >> >> Sent from my iPhone >> >>> On Oct 11, 2019, at 1:47 PM, Eric Odinski via PAAirheads wrote: >>> >>> Did anyone notice the quality control issue? Interesting video. >>> >>> Sent from my iPhone >>> >>>>> On Oct 10, 2019, at 12:58 PM, Larry A. Mansfield via PAAirheads wrote: >>>> >>>> ?I came across this today. Some may have seen this before but thought it well worth sharing. It's a video from 1975 at the BMW Motorrad factory. What a great video of the bike assembly process. >>>> >>>> https://www.youtube.com/watch?v=tlKs3Q0JdMQ&feature=youtu.be >>>> >>>> -- >>>> larry m >>>> >>>> _______________________________________________ >>>> PAAirheads mailing list >>>> PAAirheads at casano.com >>>> https://mailman.dudley.nu/mailman/listinfo/paairheads >>>> UNSUBSCRIBE: mail to PAAirheads-unsubscribe at casano.com >>> >>> _______________________________________________ >>> PAAirheads mailing list >>> PAAirheads at casano.com >>> https://mailman.dudley.nu/mailman/listinfo/paairheads >>> UNSUBSCRIBE: mail to PAAirheads-unsubscribe at casano.com From ejwjvw at comcast.net Fri Oct 11 16:56:46 2019 From: ejwjvw at comcast.net (EDWARD WHISLER) Date: Fri, 11 Oct 2019 16:56:46 -0400 (EDT) Subject: [PAAirheads] BMW Factory Film In-Reply-To: References: <3eb543ff-4572-966a-dfa6-93eb12964484@me.com> Message-ID: <868960434.6029.1570827407796@connect.xfinity.com> sure did notice the QA. sometimes you just can't beat a good dead blow hammer. From l_a_mansfield at me.com Wed Oct 16 18:01:27 2019 From: l_a_mansfield at me.com (Larry A. Mansfield) Date: Wed, 16 Oct 2019 18:01:27 -0400 Subject: [PAAirheads] BMW Saddlebags Message-ID: <3a5a787b-f14c-caf7-28dd-839683d8cb0b@me.com> Set of original BMW saddlebags in good to great condition.? One small repaired crack on the top of the left bag.? No other issues with them.? No road rash, etc.? And complete with one key.?? $150 for the set picked up here.? Shipping at cost for the two boxes and could run from $35-65 dollars. -- larry m -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_0298.jpg Type: image/jpeg Size: 1451057 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_0299.jpg Type: image/jpeg Size: 1227285 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMG_0297.jpg Type: image/jpeg Size: 1287483 bytes Desc: not available URL: From jmcrabbs at comcast.net Tue Oct 22 12:57:18 2019 From: jmcrabbs at comcast.net (JOHN CRABBS) Date: Tue, 22 Oct 2019 12:57:18 -0400 (EDT) Subject: [PAAirheads] Auction in Wirtz, Va Message-ID: <789697359.81645.1571763438637@connect.xfinity.com> Short Notice (at least from me) auction in Wirtz, Va. October 24. Lots of scooters, stationary engines, firearms (what's not to like?). The reason for this notice, however, to this group, is an R60/5 in which someone might be interested. Scroll through the photos to see it. Best to all. John Crabbs From jmcrabbs at comcast.net Tue Oct 22 12:58:12 2019 From: jmcrabbs at comcast.net (JOHN CRABBS) Date: Tue, 22 Oct 2019 12:58:12 -0400 (EDT) Subject: [PAAirheads] Link (I think I forgot this) Message-ID: <1984206122.81694.1571763492566@connect.xfinity.com> https://www.auctionzip.com/Listings/3345438.html From makenewagain at yahoo.com Thu Oct 24 09:55:46 2019 From: makenewagain at yahoo.com (walter craig) Date: Thu, 24 Oct 2019 13:55:46 +0000 (UTC) Subject: [PAAirheads] Fw: [MDairheads] 1966 BMW R-27 single idle problems In-Reply-To: <713552217.1149106.1571856026048@mail.yahoo.com> References: <713552217.1149106.1571856026048.ref@mail.yahoo.com> <713552217.1149106.1571856026048@mail.yahoo.com> Message-ID: <189108957.1538561.1571925346405@mail.yahoo.com> ----- Forwarded Message ----- From: walter craig via MDAirheads To: "mdairheads at casano.com" Sent: Wednesday, October 23, 2019, 02:41:06 PM EDTSubject: [MDairheads] 1966 BMW R-27 single idle problems Fellow Airheads, hope someone has a fix for the following: Motor timing is correct. governor working fine. Carb completely taken apart, ultra sound cleaned, compressed air thru every passage and jet. Movement of slide confirmed...no hang ups. The problem: When motor started, when throttle opened to rpms used for shifting, the motor remains running very fast, , sometimes slowing down rather quickly, other times, just remains running at pretty high rpm. I have set the air bleed jet to the manual setting but no joy. Any suggestions/ideas out there???? Any help much appreciated. Walt Craig717 229 2840 PA Airhead and "guest" person of the MD folks. ? _______________________________________________ MDAirheads mailing list MDAirheads at casano.com https://mailman.dudley.nu/mailman/listinfo/mdairheads UNSUBSCRIBE: mail to MDAirheads-unsubscribe at casano.com From l_a_mansfield at me.com Thu Oct 24 11:43:55 2019 From: l_a_mansfield at me.com (Larry A. Mansfield) Date: Thu, 24 Oct 2019 11:43:55 -0400 Subject: [PAAirheads] /5 hub Message-ID: Searching for a /5 hub.? Can be front or rear hub.? Not the brake shoe backing plate but the actual hub.? Would consider a whole wheel but don't need rim. -- larry m From jmcraftsman at netscape.net Thu Oct 24 12:30:49 2019 From: jmcraftsman at netscape.net (Jim McKinna) Date: Thu, 24 Oct 2019 12:30:49 -0400 Subject: [PAAirheads] Fwd: Motorcycle Event SwapMeet Harrisburg Nov 17th References: Message-ID: If you are looking for more ?stuff? Swap meet Nov 17. 9 to 4 Begin forwarded message: > From: Jam On Productions > Date: October 23, 2019 at 5:26:49 PM EDT > To: jmcraftsman at netscape.net > Subject: Motorcycle Event SwapMeet Harrisburg Nov 17th > > ? > > > > Buy Tickets Now > > > > > > > ?2019 Jam-On Productions | Jam-On Productions 3 Winona Ave Baltimore Md 21222 > > Like Tweet Pin +1 in > Web Version Forward Unsubscribe > > Powered by > GoDaddy Email Marketing ? From peterwmurray at gmail.com Thu Oct 24 12:35:19 2019 From: peterwmurray at gmail.com (Peter Murray) Date: Thu, 24 Oct 2019 12:35:19 -0400 Subject: [PAAirheads] [MDairheads] Fwd: Motorcycle Event SwapMeet Harrisburg Nov 17th In-Reply-To: References:

Message-ID: Details: https://motorcycleswapmeets.com/harrisburg-swapmeet-bike-show-nov/ -Peter On Thu, Oct 24, 2019 at 12:31 PM Jim McKinna via MDAirheads < mdairheads at casano.com> wrote: > If you are looking for more ?stuff? > Swap meet Nov 17. 9 to 4 > > > Begin forwarded message: > > > From: Jam On Productions > > Date: October 23, 2019 at 5:26:49 PM EDT > > To: jmcraftsman at netscape.net > > Subject: Motorcycle Event SwapMeet Harrisburg Nov 17th > > > > ? > > > > > > > > Buy Tickets Now > > > > > > > > > > > > > > ?2019 Jam-On Productions | Jam-On Productions 3 Winona Ave Baltimore Md > 21222 > > > > Like Tweet Pin +1 in > > Web Version Forward Unsubscribe > > > > Powered by > > GoDaddy Email Marketing ? > _______________________________________________ > MDAirheads mailing list > MDAirheads at casano.com > https://mailman.dudley.nu/mailman/listinfo/mdairheads > UNSUBSCRIBE: mail to MDAirheads-unsubscribe at casano.com > From l_a_mansfield at me.com Thu Oct 24 18:53:56 2019 From: l_a_mansfield at me.com (Larry Mansfield) Date: Thu, 24 Oct 2019 22:53:56 -0000 Subject: [PAAirheads] =?utf-8?q?Fwd=3A_Stay_Busy_This_Winter=2E=2E=2EProj?= =?utf-8?q?ect_Bikes_starting_at_=241=2C295!?= References: <0h44eobols2gsy84k13beo3n7lrbgqq7.qq7.1571768275@email.store.bobsbmw.com> Message-ID: <90cdca80-bab3-4db0-80f5-e4b81689d25d@me.com> FYI for those ont on Bob's mailing list.? A couple of decent Airheads in the project bikes for reasonable prices. larry m Begin forwarded message: From: Bob's BMW Motorcycles Date: 10/22/2019 To: l_a_mansfield at me.com Subject: Stay Busy This Winter...Project Bikes starting at $1,295! Roll up your sleeves this winter and get a perfectly good motorcycle back on the road!? ? Email not displaying properly??View in browser. ? Project Bikes & Pre-Owned Motorcycles Bob's BMW buys and takes trade-ins of all brand motorcycles. Some of bikes we acquire need more service work than others do before we can list them for sale. We classify these motorcycles as project bikes. All of our project bikes will make dependable, fun, safe, and roadworthy rides once the right person puts a little sweat equity into the bike and gives it the TLC it needs. The good news for buyers is thanks to Bob's thorough trade-in inspection, we can provide the bulk of what the bike needs to be roadworthy again. Plus, you will receive a special discount on any parts purchased to get it back on the road and lucky for you, you've got on the best (if not THE best) sources for BMW parts right in your backyard!? So, if you think one of the project bikes listed below is the perfect fit for your garage, call 301-497-8949 to schedule a time to come in to check it out and learn more about it.? NOTE: Most project bikes are kept in a warehouse across the street from the dealership so appointments are required.? 1976 BMW R90/6 1992 BMW R100R 1984 BMW R100RS Classic BMW! $3,895 Just 1 previous owner! $3,495 35 years young! $2,995 ? ? ? 1995 BMW K1100LT Custom! $1,495 2004 Honda Shadow 750 Low mileage! $1,295 2013 BMW K1600GTL Inspection included! $5,995 Current Savings on 2019 Models Ride home the bike of your dreams at a price you have been dreaming of. Currently BMW is offering cash savings on a variety of 2019 models. Interested in the all-new BMW R1250RT? Act now and get a free top case ($2,000 value!) plus save $1,000! Be sure to ask about Bob's NEW Pre-Paid Maintenance Plan NOW Available!? Call 301-497-8949 ext. 501 to schedule a test ride. 2019 Model Current Savings R1250RT FREE Topcase plus $1,000 OFF S1000R $1,750 OFF S1000XR $2,000 OFF S1000RR $1,000 OFF RNINET $1,500 OFF RNINET SCRAMBLER $1,500 OFF F750GS $1,500 OFF F850GS $2,500 OFF F850GS ADVENTURE $2,500 OFF C650GT $750 OFF 2018 C evolution $1,500 OFF Buy Online. Pick Up In-Store. Save 10%. Genuine BMW Parts Precisely engineered and specifically designed for your BMW Meet the highest quality standards Provide the highest degree of reliability Help to ensure a long service life Backed by a 2-year, unlimited mileage guarantee. Find the parts you need easily using our online Microfiche.?Bob's fiche features BMW factory parts diagrams that illustrate?how everything fits and functions together,?system-by-system, part-by-part. It?s a virtual encyclopedia covering every BMW model, from this year?s latest all the way back to 1950, all laid out in a user-friendly way to help you find exactly the parts you need.? Place your next online microfiche order before 10/31 and get a special 10% OFF! *Offer valid only when genuine BMW parts are added through the online microfiche system; marketplace products and parts by category are not eligible. Some BMW part numbers may not apply.? Markdowns up to 50% OFF! Fall has arrived. Ride in style during the best riding season in the Mid-Atlantic! BMW Venting Jacket - Women's & Men's BMW Venting Pants - Women's & Men's Olympia Newport Jacket 15% OFF Promo Code HOTDEALS $379.99? 15% OFF Promo Code HOTDEALS $279.00 20% OFF Promo Code HOTDEALS $179.99 ? ? ? BMW Flow Boots Rev'it! Arch Gloves BMW Airflow Gloves 15% OFF? Promo Code HOTDEALS $299.00 20% OFF Promo Code HOTDEALS $79.99 15% OFF Promo Code HOTDEALS $129.00 This email was sent to l_a_mansfield at me.com by Bob's BMW Motorcycles 10720 Guilford Road | Jessup | MD Forward to a friend | Manage Preferences | Unsubscribe From gregstreich at yahoo.com Fri Oct 25 14:11:19 2019 From: gregstreich at yahoo.com (Greg Streich) Date: Fri, 25 Oct 2019 18:11:19 +0000 (UTC) Subject: [PAAirheads] Looking for: crusty but running "R" bike In-Reply-To: <90cdca80-bab3-4db0-80f5-e4b81689d25d@me.com> References: <0h44eobols2gsy84k13beo3n7lrbgqq7.qq7.1571768275@email.store.bobsbmw.com> <90cdca80-bab3-4db0-80f5-e4b81689d25d@me.com> Message-ID: <1294545539.672704.1572027079519@mail.yahoo.com> Hi Guys, My non-airhead neighbor cornered me the other night asking if I knew of any bikes "like mine (R65) or smaller" that were "not pretty but running" for sale?? I've checked the airheads.org classifieds but not seeing much...and I don't think he wants to go to CA for one.? If anyone knows of/or has something they are wanting to part with please let me know. Thank you and Happy Friday! Greg Streich1980 R65 in Bronco Brown? From gusmcb at gmail.com Fri Oct 25 15:41:29 2019 From: gusmcb at gmail.com (Gus McBride) Date: Fri, 25 Oct 2019 15:41:29 -0400 Subject: [PAAirheads] Bike for sale: 1995 R 100 Mystic Message-ID: Hi my name is Gus out of Pittsburgh. Probably not what you are looking for, it's 988cc of reliability and fun. She has a low seat height, is in good shape and runs well. Carries a lot of groceries and looks good doing it. I added an "S" fairing and lower handlebars. I'm asking $5500.- cash and I'm not in a hurry to sell it. Call 412) 716 8868 if you are curious. Thanks [image: IMAG0290.jpg] [image: IMAG0311.jpg] [image: IMAG0249.jpg] -------------- next part -------------- A non-text attachment was scrubbed... Name: IMAG0249.jpg Type: image/jpeg Size: 1629368 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMAG0311.jpg Type: image/jpeg Size: 1530122 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: IMAG0290.jpg Type: image/jpeg Size: 1448838 bytes Desc: not available URL: From motorrader at verizon.net Mon Oct 28 15:17:56 2019 From: motorrader at verizon.net (Todd Trumbore) Date: Mon, 28 Oct 2019 15:17:56 -0400 Subject: [PAAirheads] R65LS/R80GS Anniversary Event Video References: <015701d58dc4$67906380$36b12a80$.ref@net> Message-ID: <015701d58dc4$67906380$36b12a80$@net> 40th Anniversary, R65LS, R80GS Event 18-22 September 2019 Harleysville, PA Very nice video, produced by Jill Frechie, Peter's wife. Vimeo: https://vimeo.com/369215886?ref=em-share Hope you enjoy. Todd -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From l_a_mansfield at me.com Tue Oct 29 10:40:27 2019 From: l_a_mansfield at me.com (Larry Mansfield) Date: Tue, 29 Oct 2019 14:40:27 -0000 Subject: [PAAirheads] R75/5 Left Head Wanted Message-ID: <51cf68eb-6a75-48ec-acad-3458c7d00c90@me.com> Anyone have a spare left head for a R75/5 that they'd be willing to sell?? Looking for a friend out in Oregon who's working on his 1st Airhead.? Thanks. larry m 410.218.1725