From katcon85 at optonline.net Mon Apr 15 14:43:24 2019 From: katcon85 at optonline.net (Kathryn Connell) Date: Mon, 15 Apr 2019 14:43:24 -0400 Subject: [NYAirheads] TZ Tech Day April 27 Message-ID: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> HI Gang, We are holding our 5th downstate NY tech day in Blauvelt, NY. (about 20 miles north of NYC near the TZ bridge) We have a 2 bay garage with a large concrete driveway out front, so there is plenty of room. I?ve even got a lift now! I have most of the common BMW tools. If you have a more complex project, please contact us ahead of time so we can arrange for special tools and setup. As always bring your own fluids and parts. TZ Tech day is also the home of KATDASH, and we will have a on site discount and install guide if you?re interested. I also have a Harmonizer and I can sync some carbs if you need. Looks like we will be doing a carb rebuild for a /5, so there will be that to watch. Jean has offered to help with brake bleeding and fluid replacement if you need to change your brake fluid. This year I?ve made a Torque Test board with some of the common nuts used on our Airheads. The airhead who gets the closest to measured torque settings will win a Airhead pint glass. Tom Cutter will also attend, and is willing to bring parts. Please email him ahead of time with your parts or fluids (he has the proper oils and filters in stock) needs and he will bring stuff or ship ahead to site: rubberchickenracing at gmail.com. PLEASE contact him with your parts requirements by April 17th! RSVP: PLEASE let us know you?re coming so we can plan for enough food! We?ll start at 8:30am with bagels and coffee, and we?ll have pulled pork for lunch. $10 contribution for food & beverages. email RSVP to Kat and if you need directions: katcon85 at optonline.net From jimmyd302 at aol.com Mon Apr 15 15:41:44 2019 From: jimmyd302 at aol.com (Jimmy Dalton) Date: Mon, 15 Apr 2019 15:41:44 -0400 Subject: [NYAirheads] TZ Tech Day April 27 In-Reply-To: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> References: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> Message-ID: <03168A47-D382-42B7-A3CB-89ACF82A157C@aol.com> Kat Not going to make it this year. Sailing again! On a 53? Amel Super Maramu in the USVI. Going to be leaving end of next week (likely) for Bermuda. >From there to the Chesapeake bringing the boat home form the owners winter season in the Caribbean. See you when I get back. I do plan on doing Airheads at Aerodrome and BMW Rally In Tenn. plus the NOrton Rally. ????? Jim Dalton From kindofshiftless at gmail.com Mon Apr 15 15:54:44 2019 From: kindofshiftless at gmail.com (Aaron Kent) Date: Mon, 15 Apr 2019 15:54:44 -0400 Subject: [NYAirheads] TZ Tech Day April 27 In-Reply-To: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> References: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> Message-ID: I too hope to attend - I have a 73 /5 that could use some good recommendations in regards to electrical for turn signals (the previous owner removed them) Interested to see the /5 carb rebuild. Hope to make this one. Cheers Aaron On Mon, Apr 15, 2019 at 2:45 PM Kathryn Connell via NYAirheads < nyairheads at casano.com> wrote: > HI Gang, > > We are holding our 5th downstate NY tech day in Blauvelt, NY. (about 20 > miles north of NYC near the TZ bridge) > We have a 2 bay garage with a large concrete driveway out front, so there > is plenty of room. I?ve even got a lift now! > I have most of the common BMW tools. If you have a more complex project, > please contact us ahead of time so we can arrange for special tools and > setup. As always bring your own fluids and parts. > TZ Tech day is also the home of KATDASH, and we will have a on site > discount and install guide if you?re interested. I also have a Harmonizer > and I can sync some carbs if you need. > Looks like we will be doing a carb rebuild for a /5, so there will be that > to watch. > Jean has offered to help with brake bleeding and fluid replacement if you > need to change your brake fluid. > > This year I?ve made a Torque Test board with some of the common nuts used > on our Airheads. The airhead who gets the closest to measured torque > settings will win a Airhead pint glass. > > Tom Cutter will also attend, and is willing to bring parts. Please email > him ahead of time with your parts or fluids (he has the proper oils and > filters in stock) needs and he will bring stuff or ship ahead to site: > rubberchickenracing at gmail.com. PLEASE contact him with your parts > requirements by April 17th! > > RSVP: PLEASE let us know you?re coming so we can plan for enough food! > We?ll start at 8:30am with bagels and coffee, and we?ll have pulled pork > for lunch. $10 contribution for food & beverages. email RSVP to Kat and if > you need directions: katcon85 at optonline.net > _______________________________________________ > NYAirheads mailing list > NYAirheads at casano.com > https://mailman.dudley.nu/mailman/listinfo/nyairheads > From andy.zaayenga at gmail.com Tue Apr 16 17:42:53 2019 From: andy.zaayenga at gmail.com (Andy Zaayenga) Date: Tue, 16 Apr 2019 17:42:53 -0400 Subject: [NYAirheads] [NJairheads] TZ Tech Day April 27 In-Reply-To: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> References: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> Message-ID: <004501d4f49d$58f23c60$0ad6b520$@gmail.com> Hi Kat and all, I haven't been to a tech day before and am trying to clear the decks to get to this one. Kat, I met you at the BMW RA National Rally in Wellsboro PA where you graciously walked me though installation of your KATDASH /6 kit. I am thrilled with the kit and the LED turn signals - what an improvement! Anyway, being new to tech days, I want to ask - there are two tasks that I would love to tackle. One is a compression / leak test. I only have my '70s era push in compression tester and I know it's not up to the job. Is there any chance that someone at TZ Tech Day will have a screw in compression tester and a leak tester, and can mentor me through testing? The other is spline lubrication. I've had this airhead since 1984 and had the spline lube done twice at the dealer. So I know it needs it, or at least a good look. I picked up a tube of Honda M-77 in anticipation, but would love to do this job with some wiser experienced folks around. Is this too big a job to do during a tech day? Do I bring my own basic tools? Thanks all, and I hope I can attend! Andy Zaayenga Airhead Beemers Club #465 '76 BMW R75/6, '74 BSA B50MX, '74 Honda MT250 -----Original Message----- From: NJairheads On Behalf Of Kathryn Connell via NJairheads Sent: Monday, April 15, 2019 2:43 PM To: njairheads at casano.com; nyairheads at casano.com Cc: Kathryn Connell ; PAAirheads at casano.com Subject: [NJairheads] TZ Tech Day April 27 HI Gang, We are holding our 5th downstate NY tech day in Blauvelt, NY. (about 20 miles north of NYC near the TZ bridge) We have a 2 bay garage with a large concrete driveway out front, so there is plenty of room. I?ve even got a lift now! I have most of the common BMW tools. If you have a more complex project, please contact us ahead of time so we can arrange for special tools and setup. As always bring your own fluids and parts. TZ Tech day is also the home of KATDASH, and we will have a on site discount and install guide if you?re interested. I also have a Harmonizer and I can sync some carbs if you need. Looks like we will be doing a carb rebuild for a /5, so there will be that to watch. Jean has offered to help with brake bleeding and fluid replacement if you need to change your brake fluid. This year I?ve made a Torque Test board with some of the common nuts used on our Airheads. The airhead who gets the closest to measured torque settings will win a Airhead pint glass. Tom Cutter will also attend, and is willing to bring parts. Please email him ahead of time with your parts or fluids (he has the proper oils and filters in stock) needs and he will bring stuff or ship ahead to site: rubberchickenracing at gmail.com. PLEASE contact him with your parts requirements by April 17th! RSVP: PLEASE let us know you?re coming so we can plan for enough food! We?ll start at 8:30am with bagels and coffee, and we?ll have pulled pork for lunch. $10 contribution for food & beverages. email RSVP to Kat and if you need directions: katcon85 at optonline.net _______________________________________________ NJairheads mailing list NJairheads at casano.com https://mailman.dudley.nu/mailman/listinfo/njairheads From katcon85 at optonline.net Wed Apr 17 06:06:38 2019 From: katcon85 at optonline.net (Kathryn Connell) Date: Wed, 17 Apr 2019 06:06:38 -0400 Subject: [NYAirheads] TZ Tech Day April 27 Message-ID: <9267F21342FE4114A46B3FEF45485A5F@KLCArchitect> Hello again! TZ Tech Day, Saturday April 27 10 minutes from the TZ bridge, and 30 minutes north of NYC It has been brought to my attention that I was remiss in providing my address for out tech day so here it is: Connell 85 West Erie Street Blauvelt, NY 10913 See you then! Kat From: Kathryn Connell Sent: Monday, April 15, 2019 2:43 PM To: njairheads at casano.com ; nyairheads at casano.com Cc: PAAirheads at casano.com Subject: TZ Tech Day April 27 HI Gang, We are holding our 5th downstate NY tech day in Blauvelt, NY. (about 20 miles north of NYC near the TZ bridge) We have a 2 bay garage with a large concrete driveway out front, so there is plenty of room. I?ve even got a lift now! I have most of the common BMW tools. If you have a more complex project, please contact us ahead of time so we can arrange for special tools and setup. As always bring your own fluids and parts. TZ Tech day is also the home of KATDASH, and we will have a on site discount and install guide if you?re interested. I also have a Harmonizer and I can sync some carbs if you need. Looks like we will be doing a carb rebuild for a /5, so there will be that to watch. Jean has offered to help with brake bleeding and fluid replacement if you need to change your brake fluid. This year I?ve made a Torque Test board with some of the common nuts used on our Airheads. The airhead who gets the closest to measured torque settings will win a Airhead pint glass. Tom Cutter will also attend, and is willing to bring parts. Please email him ahead of time with your parts or fluids (he has the proper oils and filters in stock) needs and he will bring stuff or ship ahead to site: rubberchickenracing at gmail.com. PLEASE contact him with your parts requirements by April 17th! RSVP: PLEASE let us know you?re coming so we can plan for enough food! We?ll start at 8:30am with bagels and coffee, and we?ll have pulled pork for lunch. $10 contribution for food & beverages. email RSVP to Kat and if you need directions: katcon85 at optonline.net From chuck at chuckrouthier.com Wed Apr 17 08:38:19 2019 From: chuck at chuckrouthier.com (chuck routhier) Date: Wed, 17 Apr 2019 08:38:19 -0400 Subject: [NYAirheads] TZ Tech Day April 27 In-Reply-To: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> References: <8B5F9876DC7B4EDF8F1CE450A4322FC7@KLCArchitect> Message-ID: Hi Kat, I?ll be there, don?t really have any critical projects except hoping that Tom could give my forks a look over or test ride. thank you and see you soon. Chuck > On Apr 15, 2019, at 2:43 PM, Kathryn Connell via NYAirheads wrote: > > HI Gang, > > We are holding our 5th downstate NY tech day in Blauvelt, NY. (about 20 miles north of NYC near the TZ bridge) > We have a 2 bay garage with a large concrete driveway out front, so there is plenty of room. I?ve even got a lift now! > I have most of the common BMW tools. If you have a more complex project, please contact us ahead of time so we can arrange for special tools and setup. As always bring your own fluids and parts. > TZ Tech day is also the home of KATDASH, and we will have a on site discount and install guide if you?re interested. I also have a Harmonizer and I can sync some carbs if you need. > Looks like we will be doing a carb rebuild for a /5, so there will be that to watch. > Jean has offered to help with brake bleeding and fluid replacement if you need to change your brake fluid. > > This year I?ve made a Torque Test board with some of the common nuts used on our Airheads. The airhead who gets the closest to measured torque settings will win a Airhead pint glass. > > Tom Cutter will also attend, and is willing to bring parts. Please email him ahead of time with your parts or fluids (he has the proper oils and filters in stock) needs and he will bring stuff or ship ahead to site: rubberchickenracing at gmail.com. PLEASE contact him with your parts requirements by April 17th! > > RSVP: PLEASE let us know you?re coming so we can plan for enough food! We?ll start at 8:30am with bagels and coffee, and we?ll have pulled pork for lunch. $10 contribution for food & beverages. email RSVP to Kat and if you need directions: katcon85 at optonline.net > _______________________________________________ > NYAirheads mailing list > NYAirheads at casano.com > https://mailman.dudley.nu/mailman/listinfo/nyairheads _________________________ chuckrouthier.com 914.374.7379 From dbprice1 at gmail.com Sat Apr 20 11:57:53 2019 From: dbprice1 at gmail.com (DPrice) Date: Sat, 20 Apr 2019 11:57:53 -0400 Subject: [NYAirheads] TZ Tech Day April 27 In-Reply-To: <9267F21342FE4114A46B3FEF45485A5F@KLCArchitect> References: <9267F21342FE4114A46B3FEF45485A5F@KLCArchitect> Message-ID: <6595E871-1057-417B-A8CE-5467390A339C@gmail.com> Looking forward to attending. I missed the last two years because of work. I hope I can get help balancing my carbs. Don > On Apr 17, 2019, at 6:06 AM, Kathryn Connell via NYAirheads wrote: > > Hello again! > TZ Tech Day, Saturday April 27 > 10 minutes from the TZ bridge, and 30 minutes north of NYC > It has been brought to my attention that I was remiss in providing my address for out tech day so here it is: > > Connell > 85 West Erie Street > Blauvelt, NY 10913 > > See you then! > Kat > > > > From: Kathryn Connell > Sent: Monday, April 15, 2019 2:43 PM > To: njairheads at casano.com ; nyairheads at casano.com > Cc: PAAirheads at casano.com > Subject: TZ Tech Day April 27 > > HI Gang, > > We are holding our 5th downstate NY tech day in Blauvelt, NY. (about 20 miles north of NYC near the TZ bridge) > We have a 2 bay garage with a large concrete driveway out front, so there is plenty of room. I?ve even got a lift now! > I have most of the common BMW tools. If you have a more complex project, please contact us ahead of time so we can arrange for special tools and setup. As always bring your own fluids and parts. > TZ Tech day is also the home of KATDASH, and we will have a on site discount and install guide if you?re interested. I also have a Harmonizer and I can sync some carbs if you need. > Looks like we will be doing a carb rebuild for a /5, so there will be that to watch. > Jean has offered to help with brake bleeding and fluid replacement if you need to change your brake fluid. > > This year I?ve made a Torque Test board with some of the common nuts used on our Airheads. The airhead who gets the closest to measured torque settings will win a Airhead pint glass. > > Tom Cutter will also attend, and is willing to bring parts. Please email him ahead of time with your parts or fluids (he has the proper oils and filters in stock) needs and he will bring stuff or ship ahead to site: rubberchickenracing at gmail.com. PLEASE contact him with your parts requirements by April 17th! > > RSVP: PLEASE let us know you?re coming so we can plan for enough food! We?ll start at 8:30am with bagels and coffee, and we?ll have pulled pork for lunch. $10 contribution for food & beverages. email RSVP to Kat and if you need directions: katcon85 at optonline.net > _______________________________________________ > NYAirheads mailing list > NYAirheads at casano.com > https://mailman.dudley.nu/mailman/listinfo/nyairheads From dud at casano.com Sat Apr 20 20:12:46 2019 From: dud at casano.com (William F. Dudley Jr.) Date: Sat, 20 Apr 2019 20:12:46 -0400 Subject: [NYAirheads] Fwd: R80GS, R65LS 40th Rally Registration can Begin In-Reply-To: <1417cfad-2044-981a-eb08-592a749b7a81@casano.com> References: <1417cfad-2044-981a-eb08-592a749b7a81@casano.com> Message-ID: If you want to go to this rally, you must/should register soon. The web site and on-line registration work, however, finding the registration page isn't obvious. From most of the pages, click on the word "REGISTRATION" at the top of the page to be taken to event registration. There's also a drop down menu from REGISTRATION that allows you to make a motel registration. Bill Dudley NJ Airmarshal -------- Forwarded Message -------- Subject: [PAAirheads] R80GS, R65LS Website is up, Registration can Begin Date: Sat, 20 Apr 2019 17:04:26 -0400 From: Todd Trumbore via PAAirheads Reply-To: Todd Trumbore To: 'PAAirheads' 40th Anniversary Celebration for the R80GS and R65LS 18-22 September, 2019 Harleysville, Montgomery County, PA 19438 Happy to announce that the website www.r80gs.org is ready to go public and registration can begin. There are many pages of information on this site, covering background, history, special guests, registration, lodging, etc. We only have room for 150 enthusiasts, so don't wait too long. Also, there is an "Early Bird" Special, you may want to take advantage of. Hope to see you here this Fall. I decided to use Ticket Spice to handle the transactions, because they only charge 99 cents for this service, but if you prefer to use PayPal ( Friend to Family) or are more comfortable sending a person check ( contact me for address), feel free to do so. If you have any questions at all please contact me at my email address. Happy Motoring, Todd Trumbore motorrader at verizon.net _______________________________________________ PAAirheads mailing list PAAirheads at casano.com https://mailman.dudley.nu/mailman/listinfo/paairheads _______________________________________________ NJairheads mailing list NJairheads at casano.com https://mailman.dudley.nu/mailman/listinfo/njairheads From aiy68 at aol.com Fri Apr 26 12:07:31 2019 From: aiy68 at aol.com (aiy68 at aol.com) Date: Fri, 26 Apr 2019 16:07:31 +0000 (UTC) Subject: [NYAirheads] CNY TechDay SAT MAY 11th References: <2012487230.1043715.1556294851066.ref@mail.yahoo.com> Message-ID: <2012487230.1043715.1556294851066@mail.yahoo.com> Wanted to remind everyone that the CNY Airheads Tech Day is scheduled for Saturday May 11th.?? Check the write up in the March or April Airmail for details..If you do not subscribe to Airmail, feel free to reply to this message and I will be glad to send them to you.? ?Please feel free to forward this e-mail to any you may think may be interested. RSVP's are appreciated:? e-mail aiy68 at aol.com or phone? 315-638-1944 we are looking forward to seeing you all Bob and Cheryl Belle From hjuster1954 at gmail.com Mon Apr 29 18:53:03 2019 From: hjuster1954 at gmail.com (Harlan Juster) Date: Mon, 29 Apr 2019 18:53:03 -0400 Subject: [NYAirheads] Capital Region Airheads Message-ID: <484FBD12-BBD4-49BC-ABD7-FAC3081CA922@gmail.com> Hi Folks, Just wondering if there are any Airheads in the capital region of the state, especially Albany and Troy. I?m in Hoosick Falls and interested in tech day and riding opportunities. My ?80 R100T is new to me and always looking for advice from the experts. I can be reached at hjuster1954 at gmail.com or 518-229-3501. Harlan