From mfriedle at verizon.net Wed May 2 16:28:17 2018 From: mfriedle at verizon.net (Michael Friedle) Date: Wed, 2 May 2018 16:28:17 -0400 Subject: [NYAirheads] Fwd: Reminder: Tappan Zee Tech Day next May 5 In-Reply-To: References: Message-ID: <163228a900f-c8d-34d49@webjas-vaa018.srv.aolmail.net> NY Airheads Note Tech Day this Saturday, 5 May. Details below. Not sure why it wasn't on Airheads Whair & When or in Airmail, but you will benefit greatly if you can attend. I am afraid I will be riding in circles at the MSF training site with another group of newbies. Enjoy yourselves enough for me too. Maybe go for tacos or tortas after the Tech Day to celebrate. Friedle -----Original Message----- From: Jean Lachaud To: William F. Dudley Jr. Cc: Michael Friedle Sent: Wed, May 2, 2018 10:29 am Subject: Reminder: Tappan Zee Tech Day next May 5 Bill: I sent the reminder below to the NJ, NY, MD and PA Airheads lists last Friday, as well as to the CT Airmarshall and the Airheads ?Big? list. One NJ airhead has contacted me, so I assume that the message went to the NJ list. However, I?m pretty sure that it was not distributed over the NY list. Could you please let me know if it went out on these lists, in particular the NY list? Except the list for which I am registered under jl at cloud9.net, I sent to the other lists using this address. Since the Tech Day is not listed on the Airheads web site, for reasons I can?t understand, and was not announced in Air Mail, the lists are the only way to publicize the event. Thanks in advance. Jean Lachaud _____________________________________________ From: Jean Lachaud [mailto:jean at beheme.info] Sent: Friday, 27 April, 2018 14:57 To: 'nyairheads at mail.casano.com' Subject: Reminder: Tappan Zee Tech Day next May 5 2018 Tappan Zee Tech Day: Saturday May 5 Mount Kisco, NY 10549 The 2018 downstate NY tech day will be held in Mount Kisco, NY (about 40 miles north of Times Square on the Saw Mill River Parkway) at the home of Steve and Rady Bauer. Steve has some neat vintage BMW?s and collectibles that are quite nice and rare. The tech day will take place in a 2-bay garage, with one lift, and plenty of space (gravel driveway) outside. If you have a more complex project, contact Jean Lachaud (jean at beheme.info) ahead of time, so that any special tools and other requirements can be arranged, if possible. A Grok Harmonizer carb tool for synching and adjusting carbs will be available, as well as electrical supplies and tools. As always, remember to bring your own fluids and parts, and special tools if you need them. If a parts run is necessary, Mount Kisco is about 35 minutes and 2 lights from Max BMW store in Brookfield, CT, which closes at 3 pm on Saturdays. ** PLEASE RSVP **: Let us know you?re coming so we can plan for enough food! We?ll start around 9am with bagels and custom roasted coffee by coffee importer Steve Bauer, and later a grill lunch (dogs and burgers, sodas, etc.) A $10 contribution for food & beverages is requested. Please e-mail Steve at cotyledoncoffee at gmail.com for more info and directions: Steve Bauer: Address: 14 Woodland Rd, Mount Kisco, NY 10549 Home Tel. 914-864-2267 Steve Cell: 914-960-9669 Address Notes: We are not easy to find! There is more than one ?Woodland? near Mount Kisco which can confuse navigation systems. We are NOT Woodland Street, Avenue or Lane, etc. We are Woodland Road, which is off Crow Hill Road. NOTE: Remember that trailers and commercial vehicles are not allowed on Parkways. ? Best route North/South is the Saw Mill River Parkway to the Mount Kisco exit (No. 34), go West (left turn) on Route 133 to Crow Hill, go North (right turn) on Crow Hill at the white church to the stop sign, then left (still Crow Hill Road) to the first right on Woodland Road. It is a gravel road so drive slowly. Follow the signs at the pond to 14. Total from SMRP exit is about a mile. ? Also possible is via Route 100 to Crow Hill (heading East) to Woodland Road. Crow Hill Road is easily accessed from NY Routes 100 and 133. Both routes can be accessed at Exit 8 (Millwood) of the Taconic State Parkway. Mount Kisco is easily accessed on NY Routes 133, 117 and 172, as well as exit 34 of the Saw Mill River Parkway, and exit 4 of I-684. Hope to see you all on May 5! Virus-free. www.avast.com From jl at cloud9.net Thu May 3 10:55:45 2018 From: jl at cloud9.net (Jean Lachaud) Date: Thu, 3 May 2018 10:55:45 -0400 Subject: [NYAirheads] Reminder: Tappan Zee Tech Day next May 5 Message-ID: <001a01d3e2ee$d0d4b0d0$727e1270$@cloud9.net> 2018 Tappan Zee Tech Day: Saturday May 5 Mount Kisco, NY 10549 The 2018 downstate NY tech day will be held in Mount Kisco, NY (about 40 miles north of Times Square on the Saw Mill River Parkway) at the home of Steve and Rady Bauer. Steve has some neat vintage BMW's and collectibles that are quite nice and rare. The tech day will take place in a 2-bay garage, with one lift, and plenty of space (gravel driveway) outside. If you have a more complex project, contact Jean Lachaud (jean at beheme.info) ahead of time, so that any special tools and other requirements can be arranged, if possible. A Grok Harmonizer carb tool for synching and adjusting carbs will be available, as well as electrical supplies and tools. As always, remember to bring your own fluids and parts, and special tools if you need them. If a parts run is necessary, Mount Kisco is about 35 minutes and 2 lights from Max BMW store in Brookfield, CT, which closes at 3 pm on Saturdays. ** PLEASE RSVP **: Let us know you're coming so we can plan for enough food! We'll start around 9am with bagels and custom roasted coffee by coffee importer Steve Bauer, and later a grill lunch (dogs and burgers, sodas, etc.) A $10 contribution for food & beverages is requested. Please e-mail Steve at cotyledoncoffee at gmail.com for more info and directions: Steve Bauer: Address: 14 Woodland Rd, Mount Kisco, NY 10549 Home Tel. 914-864-2267 Steve Cell: 914-960-9669 Address Notes: We are not easy to find! There is more than one "Woodland" near Mount Kisco which can confuse navigation systems. We are NOT Woodland Street, Avenue or Lane, etc. We are Woodland Road, which is off Crow Hill Road. NOTE: Remember that trailers and commercial vehicles are not allowed on Parkways. * Best route North/South is the Saw Mill River Parkway to the Mount Kisco exit (No. 34), go West (left turn) on Route 133 to Crow Hill, go North (right turn) on Crow Hill at the white church to the stop sign, then left (still Crow Hill Road) to the first right on Woodland Road. It is a gravel road so drive slowly. Follow the signs at the pond to 14. Total from SMRP exit is about a mile. * Also possible is via Route 100 to Crow Hill (heading East) to Woodland Road. Crow Hill Road is easily accessed from NY Routes 100 and 133. Both routes can be accessed at Exit 8 (Millwood) of the Taconic State Parkway. Mount Kisco is easily accessed on NY Routes 133, 117 and 172, as well as exit 34 of the Saw Mill River Parkway, and exit 4 of I-684. Hope to see you all on May 5! --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus From aiy68 at aol.com Thu May 3 21:13:59 2018 From: aiy68 at aol.com (aiy68 at aol.com) Date: Thu, 3 May 2018 21:13:59 -0400 Subject: [NYAirheads] CNY 6th Annual Tech day May 12th Message-ID: <16328b67e1b-c8a-3cace@webjas-vad169.srv.aolmail.net> Airheads: Just wanted to send out a final reminder for the CNY Tech day on Saturday May 12th. We are located just West of Syracuse and are looking forward to seeing you. An RSV:P would be appreciated and will make planning food easier. Thanks in advance. Check this month's Airmail for directions or e-mail me at aiy68 at aol.com and I will forward them your way. Hope to see you on Saturday. .Bob and Cheryl Belle From adam.paiva at gmail.com Sun May 6 16:57:20 2018 From: adam.paiva at gmail.com (Adam Paiva) Date: Sun, 6 May 2018 16:57:20 -0400 Subject: [NYAirheads] Tappan Zee Tech Day Message-ID: Nice to see some fellow airheads and big thank you to Steve for graciously hosting the tech day yesterday. Was a lovely day to be out on the motorcycle, or just talking about them! Pics: https://www.flickr.com/photos/adampaiva/albums/72157694740647031 cheers, Adam From aiy68 at aol.com Fri May 18 08:26:14 2018 From: aiy68 at aol.com (aiy68 at aol.com) Date: Fri, 18 May 2018 08:26:14 -0400 Subject: [NYAirheads] CNY Tech Day Message-ID: <1637336fe67-1e05-38a6f@webjas-vaa239.srv.aolmail.net> Hello, Someone who attended the Tech Day on the 12th left a light brown chamois shirt behind. If its yours, or if you know who owns it, please let me know and I will arrange return. Thanks, Bob Belle aiy68 at aol.com From mfriedle at verizon.net Fri May 18 08:59:42 2018 From: mfriedle at verizon.net (Michael Friedle) Date: Fri, 18 May 2018 08:59:42 -0400 Subject: [NYAirheads] CNY Tech Day In-Reply-To: <1637336fe67-1e05-38a6f@webjas-vaa239.srv.aolmail.net> References: <1637336fe67-1e05-38a6f@webjas-vaa239.srv.aolmail.net> Message-ID: <16373559e39-179f-24207@webjas-vac112.srv.aolmail.net> Does it run????? Friedle -----Original Message----- From: aiy68--- via NYAirheads To: nyairheads Sent: Fri, May 18, 2018 8:26 am Subject: [NYAirheads] CNY Tech Day Hello, Someone who attended the Tech Day on the 12th left a light brown chamois shirt behind. If its yours, or if you know who owns it, please let me know and I will arrange return. Thanks, Bob Belle aiy68 at aol.com _______________________________________________ NYAirheads mailing list NYAirheads at mail.casano.com https://mailman.dudley.nu/mailman/listinfo/nyairheads