[NJairheads] TZ Tech Day April 27

[Joseph Linsalata]

Hello Kat! I would like to stop by and say hello Saturday! I live in
Emerson and frequently ride to The Market and Nyack like when I cycled!
Best regards
Joe

On Wed, Apr 17, 2019 at 6:08 AM Kathryn Connell via NJairheads <
njairheads at casano.com> wrote:

> Hello again!
> TZ Tech Day, Saturday April 27
> 10 minutes from the TZ bridge, and 30 minutes north of NYC
> It has been brought to my attention that I was remiss in providing my
> address for out tech day so here it is:
>
> Connell
> 85 West Erie Street
> Blauvelt, NY 10913
>
> See you then!
> Kat
>
>
>
> From: Kathryn Connell
> Sent: Monday, April 15, 2019 2:43 PM
> To: njairheads at casano.com ; nyairheads at casano.com
> Cc: PAAirheads at casano.com
> Subject: TZ Tech Day April 27
>
> HI Gang,
>
> We are holding our 5th downstate NY tech day in Blauvelt, NY. (about 20
> miles north of NYC near the TZ bridge)
> We have a 2 bay garage with a large concrete driveway out front, so there
> is plenty of room. I’ve even got a lift now!
> I have most of the common BMW tools. If you have a more complex project,
> please contact us ahead of time so we can arrange for special tools and
> setup. As always bring your own fluids and parts.
> TZ Tech day is also the home of KATDASH, and we will have a on site
> discount and install guide if you’re interested. I also have a Harmonizer
> and I can sync some carbs if you need.
> Looks like we will be doing a carb rebuild for a /5, so there will be that
> to watch.
> Jean has offered to help with brake bleeding and fluid replacement if you
> need to change your brake fluid.
>
> This year I’ve made a Torque Test board with some of the common nuts used
> on our Airheads. The airhead who gets the closest to measured torque
> settings will win a Airhead pint glass.
>
> Tom Cutter will also attend, and is willing to bring parts. Please email
> him ahead of time with your parts or fluids (he has the proper oils and
> filters in stock) needs and he will bring stuff or ship ahead to site:
> rubberchickenracing at gmail.com. PLEASE contact him with your parts
> requirements by April 17th!
>
> RSVP: PLEASE let us know you’re coming so we can plan for enough food!
> We’ll start at 8:30am with bagels and coffee, and we’ll have pulled pork
> for lunch. $10 contribution for food & beverages. email RSVP to Kat and if
> you need directions: katcon85 at optonline.net
> _______________________________________________
> NJairheads mailing list
> NJairheads at casano.com
> https://mailman.dudley.nu/mailman/listinfo/njairheads
>