From stevegplumber at gmail.com Sun May 6 11:53:19 2018 From: stevegplumber at gmail.com (Steve Giannotti) Date: Sun, 06 May 2018 15:53:19 +0000 Subject: [NJairheads] Reminder: Tappan Zee Tech Day next May 5 In-Reply-To: <008e01d3de59$87e31c20$97a95460$@cloud9.net> References: <008e01d3de59$87e31c20$97a95460$@cloud9.net> Message-ID: I had a nice time at The Tech Guy in Mount Kisco yesterday there was talk of another tech day in Connecticut but I can't seem to find it on the website any information would be appreciated thank you Steve giannotti On Fri, Apr 27, 2018, 3:54 PM Jean Lachaud via NJairheads < njairheads at casano.com> wrote: > 2018 Tappan Zee Tech Day: > Saturday May 5 > Mount Kisco, NY 10549 > > The 2018 downstate NY tech day will be held in Mount Kisco, NY (about 40 > miles north of Times Square on the Saw Mill River Parkway) at the home of > Steve and Rady Bauer. > Steve has some neat vintage BMW's and collectibles that are quite nice and > rare. > > The tech day will take place in a 2-bay garage, with one lift, and plenty > of > space (gravel driveway) outside. > > If you have a more complex project, contact Jean Lachaud (jean at beheme.info > ) > ahead of time, so that any special tools and other requirements can be > arranged, if possible. > A Grok Harmonizer carb tool for synching and adjusting carbs will be > available, as well as electrical supplies and tools. > > As always, remember to bring your own fluids and parts, and special tools > if > you need them. > > If a parts run is necessary, Mount Kisco is about 35 minutes and 2 lights > from Max BMW store in Brookfield, CT, which closes at 3 pm on Saturdays. > > ** PLEASE RSVP **: Let us know you're coming so we can plan for enough > food! > > > We'll start around 9am with bagels and custom roasted coffee by coffee > importer Steve Bauer, and later a grill lunch (dogs and burgers, sodas, > etc.) > A $10 contribution for food & beverages is requested. > > Please e-mail Steve at cotyledoncoffee at gmail.com for more info and > directions: > > Steve Bauer: > Address: 14 Woodland Rd, Mount Kisco, NY 10549 > Home Tel. 914-864-2267 > Steve Cell: 914-960-9669 > > Address Notes: We are not easy to find! There is more than one "Woodland" > near Mount Kisco which can confuse navigation systems. We are NOT Woodland > Street, Avenue or Lane, etc. We are Woodland Road, which is off Crow Hill > Road. > > NOTE: Remember that trailers and commercial vehicles are not allowed on > Parkways. > > * Best route North/South is the Saw Mill River Parkway to the Mount > Kisco exit (No. 34), go West (left turn) on Route 133 to Crow Hill, go > North > (right turn) on Crow Hill at the white church to the stop sign, then left > (still Crow Hill Road) to the first right on Woodland Road. It is a gravel > road so drive slowly. Follow the signs at the pond to 14. > Total from SMRP exit is about a mile. > > * Also possible is via Route 100 to Crow Hill (heading East) to > Woodland Road. > > Crow Hill Road is easily accessed from NY Routes 100 and 133. Both routes > can be accessed at Exit 8 (Millwood) of the Taconic State Parkway. > > Mount Kisco is easily accessed on NY Routes 133, 117 and 172, as well as > exit 34 of the Saw Mill River Parkway, and exit 4 of I-684. > > Hope to see you all on May 5! > > > > --- > This email has been checked for viruses by Avast antivirus software. > https://www.avast.com/antivirus > _______________________________________________ > NJairheads mailing list > NJairheads at mail.casano.com > https://mailman.dudley.nu/mailman/listinfo/njairheads > From wfdudley at gmail.com Sun May 6 13:13:31 2018 From: wfdudley at gmail.com (William Dudley) Date: Sun, 06 May 2018 17:13:31 +0000 Subject: [NJairheads] possible CT tech day In-Reply-To: References: <008e01d3de59$87e31c20$97a95460$@cloud9.net> Message-ID: Contact the Connecticut Airmarshal and ask him. His contact info is in the back of every AirMail. Please report back what you find. Bill Dudley NJ AM sent from my Linux phone On Sun, May 6, 2018, 10:54 AM Steve Giannotti via NJairheads < njairheads at casano.com> wrote: > I had a nice time at The Tech Guy in Mount Kisco yesterday there was talk > of another tech day in Connecticut but I can't seem to find it on the > website any information would be appreciated thank you Steve giannotti > > On Fri, Apr 27, 2018, 3:54 PM Jean Lachaud via NJairheads < > njairheads at casano.com> wrote: > > > 2018 Tappan Zee Tech Day: > > Saturday May 5 > > Mount Kisco, NY 10549 > > > > The 2018 downstate NY tech day will be held in Mount Kisco, NY (about 40 > > miles north of Times Square on the Saw Mill River Parkway) at the home of > > Steve and Rady Bauer. > > Steve has some neat vintage BMW's and collectibles that are quite nice > and > > rare. > > > > The tech day will take place in a 2-bay garage, with one lift, and plenty > > of > > space (gravel driveway) outside. > > > > If you have a more complex project, contact Jean Lachaud ( > jean at beheme.info > > ) > > ahead of time, so that any special tools and other requirements can be > > arranged, if possible. > > A Grok Harmonizer carb tool for synching and adjusting carbs will be > > available, as well as electrical supplies and tools. > > > > As always, remember to bring your own fluids and parts, and special tools > > if > > you need them. > > > > If a parts run is necessary, Mount Kisco is about 35 minutes and 2 lights > > from Max BMW store in Brookfield, CT, which closes at 3 pm on Saturdays. > > > > ** PLEASE RSVP **: Let us know you're coming so we can plan for enough > > food! > > > > > > We'll start around 9am with bagels and custom roasted coffee by coffee > > importer Steve Bauer, and later a grill lunch (dogs and burgers, sodas, > > etc.) > > A $10 contribution for food & beverages is requested. > > > > Please e-mail Steve at cotyledoncoffee at gmail.com for more info and > > directions: > > > > Steve Bauer: > > Address: 14 Woodland Rd, Mount Kisco, NY 10549 > > Home Tel. 914-864-2267 > > Steve Cell: 914-960-9669 > > > > Address Notes: We are not easy to find! There is more than one > "Woodland" > > near Mount Kisco which can confuse navigation systems. We are NOT > Woodland > > Street, Avenue or Lane, etc. We are Woodland Road, which is off Crow > Hill > > Road. > > > > NOTE: Remember that trailers and commercial vehicles are not allowed on > > Parkways. > > > > * Best route North/South is the Saw Mill River Parkway to the Mount > > Kisco exit (No. 34), go West (left turn) on Route 133 to Crow Hill, go > > North > > (right turn) on Crow Hill at the white church to the stop sign, then left > > (still Crow Hill Road) to the first right on Woodland Road. It is a > gravel > > road so drive slowly. Follow the signs at the pond to 14. > > Total from SMRP exit is about a mile. > > > > * Also possible is via Route 100 to Crow Hill (heading East) to > > Woodland Road. > > > > Crow Hill Road is easily accessed from NY Routes 100 and 133. Both routes > > can be accessed at Exit 8 (Millwood) of the Taconic State Parkway. > > > > Mount Kisco is easily accessed on NY Routes 133, 117 and 172, as well as > > exit 34 of the Saw Mill River Parkway, and exit 4 of I-684. > > > > Hope to see you all on May 5! > > > > > > > > --- > > This email has been checked for viruses by Avast antivirus software. > > https://www.avast.com/antivirus > > _______________________________________________ > > NJairheads mailing list > > NJairheads at mail.casano.com > > https://mailman.dudley.nu/mailman/listinfo/njairheads > > > _______________________________________________ > NJairheads mailing list > NJairheads at mail.casano.com > https://mailman.dudley.nu/mailman/listinfo/njairheads > From r90s-rider at casano.com Wed May 16 20:34:31 2018 From: r90s-rider at casano.com (William F. Dudley Jr.) Date: Wed, 16 May 2018 21:34:31 -0300 Subject: [NJairheads] PA Tech Day September 8th In-Reply-To: References: Message-ID: <20180517003207.M6730@dudley.nu> Heads up! Someone is hosting a tech day in PA September 8. Y'all are invited. Please RSVP to the PA Airmarshal (his email is in your Airmail) if you intend to go. Bill Dudley ________________________________________ From: PAAirheads on behalf of Mark Passaro via PAAirheads Sent: Tuesday, May 8, 2018 11:13 PM To: paairheads at mail.casano.com; Maryland Airheads Subject: [PAAirheads] Tech Day September 8th Fellow Airheads, I've been a club member now about twenty years and decided it was long overdue to at least host a Tech Day. It will be nice if a few folks show up, wouldn't mind a crowd even! Here 'ya go: First Annual Mason Dixon Tech Day/Social Gathering/Swap Meet-Saturday September 8th, 8:00 AM to ? at the rural home of Mark Passaro. We are located in south- central PA about twenty miles north of the MD line at the foot of South Mtn. near York Springs. Perhaps some of the Marylanders will join us, all are welcome. Hoping to have some "keepers of the knowledge" present to assist with repairs or maintenance. Most standard and some special tools here, contact me if you have a need and arrangements can be made to have required tools available. Oft times now these affairs are more of a social gathering and less about wrenching and that is fine as well. Plenty of room and we'll keep the pool open! I will have table space available to sell any parts or gear (I'm emptying some shelves), clean out that horde of Motorrad gold and bring it, pass it on to a Club member. We're located at: 2081 County Line Rd. York Springs, PA 17372. Some notice you're coming will help in planning food and refreshments. Coffee/donuts in the morning and something good for lunch. Contact Mark at 717-514-3939 or email longshot1ah at comcast.net Mark Passaro #5559 _______________________________________________ PAAirheads mailing list PAAirheads at mail.casano.com https://mailman.dudley.nu/mailman/listinfo/paairheads ------- End of Forwarded Message ------- Bill Dudley From dacush at ptd.net Wed May 30 10:09:02 2018 From: dacush at ptd.net (David Cushing) Date: Wed, 30 May 2018 10:09:02 -0400 Subject: [NJairheads] R80 for sale Message-ID: I'm asking $2,500 for my 1978 R80/7 pictured here. Bike is located near Phillipsburg, NJ. It has the Luftmeister fairing and BMW saddlebags. 58,400+ miles. Runs well. Some minor scratches. Not original color but I think it is nicer. Saddle bags are faded and one has makeshift clasps. Also has an extra Corbin seat in like new condition that is too hard for me. Rear tire is worn. Contact Frank Becker at packmanfb at gmail.com or 908-268-3951 Friend of submitter - David Cushing -------------- next part -------------- A non-text attachment was scrubbed... Name: Becker R80(1).JPG Type: image/jpeg Size: 146915 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Becker R80(2).JPG Type: image/jpeg Size: 104776 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Becker R80(3).JPG Type: image/jpeg Size: 111433 bytes Desc: not available URL: -------------- next part -------------- A non-text attachment was scrubbed... Name: Becker R80a.JPG Type: image/jpeg Size: 135380 bytes Desc: not available URL: