Who did I loan my CycleWorks timing-chain tools too a few years ago?
Craig Barnhart
barney12231963 at gmail.com
Sat Jan 16 19:22:39 EST 2021
Hopefully Airheads are better than our neighbors.
Craig
On Sat, Jan 16, 2021 at 6:58 PM Jim Wilson <vinceotter49 at gmail.com> wrote:
> yep
> eyons ago bill a neighbor asked to borrow my wheel barrow
>
> it came back with 15-20 lbs of concrete stuck to the bottom
>
> On Sat, Jan 16, 2021 at 2:57 PM William Lambert via MDAirheads <
> mdairheads at casano.com> wrote:
>
>> Mike,
>>
>> Very true. Seldom am I one to be the Devil’s advocate. I recently
>> (last week) experienced similar circumstance. My neighbor asked to borrow
>> my 4’ drywall square. To which I was happy to oblige. A week went by, I
>> had to prompt him for the return of the tool. In the cover of darkness, he
>> dropped it off. Bent, chipped, scratched. It has a workbook tread pattern
>> stamped on. Still functional but not as pleasant to work with as before.
>> It happens. While grinding through a workday, some guys are capable of
>> destroying a forged steel cannonball.
>>
>> A minor issue with the prospect of passing around special tools would
>> be their proper identification. Tools of all sorts are routinely referred
>> to by different names by many people. Based on verbal description, it
>> might be difficult to be certain the proper tool for a specific task is
>> being forwarded. Do BMW special tools all carry a part number ? If so, to
>> include this number as data on the spreadsheet might be helpful. In other
>> cases, we often craft our own shop made special tool. These could also be
>> identified by part number and just as easily be passed around.
>>
>> Bill Lambert.
>>
>> On Jan 16, 2021, at 12:40 PM, Michael Cecchini via MDAirheads <
>> mdairheads at casano.com> wrote:
>>
>> Sadly, such is the very common problem with loaning tools.....or a tool
>> loan program.
>>
>> Even when returned with all the bits, the tools usually take quite a
>> beating because most times the user is a novice and doesn't know much about
>> tool care & attention.
>>
>> The only way it really works is for one experienced person to take charge
>> and everyone chips in $10--$20 per year to keep tools in good condition &
>> buy new ones as needed.
>>
>> Then you need to consider what happens when a special tool is no longer
>> being reproduced and it needs replacing? Bummer.
>>
>> Hope they guy is still around and can find the missing bits.
>>
>> My best........ Mike
>>
>>
>> -----Original Message-----
>> From: Zwicky, Eric
>>
>> Hi all,
>>
>> I hope it's OK to post this here. A few years ago I sent my
>> CycleWorks engine tool set to a guy in Athens GA. He had it for
>> about a year (no problem because I was done with it for the time being),
>> and when he sent it back I just put the bag in my tool drawers and
>> didn't look at them again.
>>
>> Recently I gave the bag to a local guy who's rebuilding his /5 and he is
>> getting around to the timing chain now, and the tool kit is missing a
>> few key pieces.
>>
>> I've looked through all my folders and sub-folders and can't find the
>> email with the guy in Athens. I think I remember his name but can't
>> find the thread that way either, so maybe I am not remembering his name
>> correctly.
>>
>> So if you're reading this, and you're the guy in Athens, would you mind
>> getting in touch with me and I can let you know what I am missing?
>>
>> Thanks in advance,
>>
>> Eric Zwicky
>> Richmond VA
>>
>>
>>
>
> --
>
>
>
> * Jim *
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.dudley.nu/pipermail/mdairheads/attachments/20210116/cd1aa3a3/attachment.htm>
More information about the MDAirheads
mailing list